English | 简体中文 | 繁體中文 | 한국어 | 日本語
Friday, 3 May 2013, 20:40 HKT/SGT
Share:
    

Source: American Axle & Manufacturing Holdings, Inc.
AAM Reports First Quarter 2013 Financial Results

Detroit, Michigan, May 3, 2013 - (ACN Newswire) - American Axle & Manufacturing Holdings, Inc. (AAM), which is traded as AXL on the NYSE, today reported its financial results for the first quarter of 2013.

First Quarter 2013 Results

-- First quarter 2013 sales of $755.6 million
-- Non-GM sales were $188.1 million
-- Gross profit of $104.3 million, or 13.8% of sales
-- Operating income of $44.7 million, or 5.9% of sales
-- Net income of $7.3 million, or $0.10 per share
-- AAM's quarterly results reflect the impact of $11.3 million (or $0.13 per share) of debt refinancing and redemption costs
-- Adjusted EBITDA (earnings before interest, taxes, depreciation and amortization excluding the impact of debt refinancing and redemption costs) of $86.6 million or approximately 11.5% of sales

AAM's net income in the first quarter of 2013 was $7.3 million, or $0.10 per share as compared to net income of $51.2 million, or $0.68 per share, in the first quarter of 2012. In the first quarter of 2013, AAM's results reflect the impact of $11.3 million (or $0.13 per share) of debt refinancing and redemption costs.

"AAM's financial results in the first quarter of 2013 reflect our commitment to deliver improved profitability and launch performance globally," said AAM's President and Chief Executive Officer, David C. Dauch. "While we continue to take actions to improve our operating and financial performance, we remain focused on flawlessly launching several major programs in 2013. These include products supporting GM's next-generation full-size pickup truck and SUV program, the RAM Heavy Duty pickup truck program, as well as AAM's EcoTracTM Disconnecting All Wheel Drive system."

Dauch also stated, "In the first quarter of 2013, we took another step in improving AAM's balance sheet strength. The debt refinancing activities successfully completed in the quarter were highlighted by the issuance of $400 million of 6.25% Senior Notes due 2021. This supports AAM's future operational and financial flexibility, and improves our capital structure."

Net sales in the first quarter of 2013 were approximately $755.6 million as compared to $751.5 million in the first quarter of 2012. Sales in the first quarter of 2013 reflect the adverse impact of approximately $12.5 million related to the labor strike at General Motors' Rayong factory in Thailand.

Non-GM sales were $188.1 million in the first quarter of 2013 as compared to $193.6 million in the first quarter of 2012.

AAM's content-per-vehicle is measured by the dollar value of our products supporting our customers' North American light truck and SUV programs. In the first quarter of 2013, AAM's content-per-vehicle increased to $1,504 as compared to $1,475 in the first quarter of 2012.

AAM's gross profit in the first quarter of 2013 was $104.3 million or 13.8% of sales as compared to $139.2 million or 18.5% of sales in the first quarter in 2012.

AAM's SG&A spending in the first quarter of 2013 was $59.6 million, or 7.9% of sales, as compared to $61.8 million, or 8.2% of sales, in the first quarter of 2012. AAM's R&D spending in the first quarter of 2013 was $28.5 million as compared to $30.1 million in the first quarter of 2012.

In the first quarter of 2013, AAM's operating income was $44.7 million or 5.9% of sales as compared to $77.4 million or 10.3% of sales in the first quarter of 2012.

In the first quarter of 2013, AAM's net income was $7.3 million or $0.10 per share as compared to $51.2 million or $0.68 per share in the first quarter of 2012.

AAM defines Adjusted EBITDA to be earnings before interest, taxes, depreciation and amortization excluding the impact of debt refinancing and redemption costs. In the first quarter of 2013, AAM's Adjusted EBITDA was $86.6 million or 11.5% of sales.

AAM defines free cash flow to be net cash used in operating activities less capital expenditures net of proceeds from the sale of property, plant and equipment and the sale-leaseback of equipment.

Net cash used in operating activities for the first quarter 2013 was $26.8 million. Capital spending, net of proceeds from the sale of property, plant and equipment and the sale-leaseback of equipment, for the first quarter 2013 was $43.9 million. Reflecting the impact of this activity, AAM's free cash flow was a use of $70.7 million in the first quarter 2013.

A conference call to review AAM's first quarter 2013 results is scheduled today at 10:00 AM ET. Interested participants may listen to the live conference call by logging onto AAM's investor web site at http://investor.aam.com or calling (877) 278-1452 from the United States or +1-973-200-3383 from outside the United States. A replay will be available from 5:00 p.m. ET on May 3, 2013 until 5:00 p.m. ET May 10, 2013 by dialing (855) 859-2056 from the United States or +1-404-537-3406 from outside the United States. When prompted, callers should enter conference reservation number 32371382.

Non-GAAP Financial Information

In addition to the results reported in accordance with accounting principles generally accepted in the United States of America (GAAP) included within this press release, AAM has provided certain information, which includes non-GAAP financial measures. Such information is reconciled to its closest GAAP measure in accordance with Securities and Exchange Commission rules and is included in the attached supplemental data.

Management believes that these non-GAAP financial measures are useful to both management and its stockholders in their analysis of the Company's business and operating performance. Management also uses this information for operational planning and decision-making purposes.

Non-GAAP financial measures are not and should not be considered a substitute for any GAAP measure. Additionally, non-GAAP financial measures as presented by AAM may not be comparable to similarly titled measures reported by other companies.

AAM is a world leader in the manufacture, engineering, design and validation of driveline and drivetrain systems and related components and modules, chassis systems and metal-formed products for light trucks, sport utility vehicles, passenger cars, crossover vehicles and commercial vehicles. In addition to locations in the United States (Michigan, Ohio, Pennsylvania and Indiana), AAM also has offices or facilities in Brazil, China, Germany, India, Japan, Luxembourg, Mexico, Poland, Scotland, South Korea, Sweden and Thailand.

In this earnings release, we make statements concerning our expectations, beliefs, plans, objectives, goals, strategies, and future events or performance. Forward-looking statements should not be read as a guarantee of future performance or results, and will not necessarily be accurate indications of the times at, or by, which such performance or results will be achieved. Forward-looking statements are based on information available at the time those statements are made and/or management's good faith belief as of that time with respect to future events and are subject to risks and may differ materially from those expressed in or suggested by the forward-looking statements. Important factors that could cause such differences include, but are not limited to: global economic conditions, including the impact of the debt crisis in the Euro-zone; reduced purchases of our products by GM, Chrysler or other customers; reduced demand for our customers' products (particularly light trucks and SUVs produced by GM and Chrysler); our ability or our customers' and suppliers' ability to successfully launch new product programs on a timely basis; our ability to realize the expected revenues from our new and incremental business backlog; our ability to respond to changes in technology, increased competition or pricing pressures; supply shortages or price increases in raw materials, utilities or other operating supplies for us or our customers as a result of natural disasters or otherwise; liabilities arising from warranty claims, product recall or field actions, product liability and legal proceedings to which we are or may become a party; our ability to achieve the level of cost reductions required to sustain global cost competitiveness; our ability to attract new customers and programs for new products; price volatility in, or reduced availability of, fuel; our ability to develop and produce new products that reflect market demand; lower-than-anticipated market acceptance of new or existing products; our ability to maintain satisfactory labor relations and avoid work stoppages; our suppliers', our customers' and their suppliers' ability to maintain satisfactory labor relations and avoid work stoppages; risks inherent in our international operations (including adverse changes in political stability, taxes and other law changes, potential disruptions of production and supply, and currency rate fluctuations); availability of financing for working capital, capital expenditures, R&D or other general corporate purposes, including our ability to comply with financial covenants; our customers' and suppliers' availability of financing for working capital, capital expenditures, R&D or other general corporate purposes; adverse changes in laws, government regulations or market conditions affecting our products or our customers' products (such as the Corporate Average Fuel Economy ("CAFE") regulations); changes in liabilities arising from pension and other postretirement benefit obligations; our ability to attract and retain key associates; risks of noncompliance with environmental laws and regulations or risks of environmental issues that could result in unforeseen costs at our facilities; our ability or our customers' and suppliers' ability to comply with the Dodd-Frank Act and other regulatory requirements and the potential costs of such compliance; our ability to consummate and integrate acquisitions and joint ventures; other unanticipated events and conditions that may hinder our ability to compete. It is not possible to foresee or identify all such factors and we make no commitment to update any forward-looking statement or to disclose any facts, events or circumstances after the date hereof that may affect the accuracy of any forward-looking statement.

For more information...

Christopher M. Son
Director, Investor Relations,
Corporate Communications and Marketing
+1-313-758-4814
chris.son@aam.com

Liz Ventimiglia
Manager, Investor Relations
+1-313-758-4635
liz.ventimiglia@aam.com

Or visit the AAM website at www.aam.com .


American Axle & Manufacturing First Quarter 2013 Earnings Release:
http://hugin.info/143751/R/1698216/560302.pdf


This announcement is distributed by Thomson Reuters on behalf of Thomson Reuters clients.

The owner of this announcement warrants that:
(i) the releases contained herein are protected by copyright and other applicable laws; and
(ii) they are solely responsible for the content, accuracy and originality of the
information contained therein.

Source: American Axle & Manufacturing Holdings, Inc via Thomson Reuters ONE



Topic: Earnings
Source: American Axle & Manufacturing Holdings, Inc.


https://www.acnnewswire.com
From the Asia Corporate News Network


Copyright © 2024 ACN Newswire. All rights reserved. A division of Asia Corporate News Network.

 

American Axle & Manufacturing Holdings, Inc. Related News
Mar 21, 2016 19:30 HKT/SGT
AAM to Present at the Bank of America Merrill Lynch 2016 Auto Summit Conference
Oct 30, 2015 20:50 HKT/SGT
AAM Reports Third Quarter 2015 Financial Results
Oct 20, 2015 22:30 HKT/SGT
AAM to Webcast and Teleconference Third Quarter 2015 Financial Results on October 30, 2015
July 31, 2015 21:15 HKT/SGT
AAM Reports Second Quarter 2015 Financial Results
July 31, 2015 20:40 HKT/SGT
AAM Appoints Michael K. Simonte President and Christopher J. May, Vice President & Chief Financial Officer
More news >>
Copyright © 2024 ACN Newswire - Asia Corporate News Network
Home | About us | Services | Partners | Events | Login | Contact us | Cookies Policy | Privacy Policy | Disclaimer | Terms of Use | RSS
US: +1 214 890 4418 | China: +86 181 2376 3721 | Hong Kong: +852 8192 4922 | Singapore: +65 6549 7068 | Tokyo: +81 3 6859 8575