|
|
|
|
|
|
- Delivery of FGSS for the first LNG fueled PCC built in Japan
- It was the first delivery of the system for marine engines, and also the provision of the engineering service and technical support relating to gas handling for shipbuilding yards |
TOKYO, Dec 24, 2019 - (JCN Newswire) - Mitsubishi Shipbuilding Co., Ltd., a member of Mitsubishi Heavy Industries, Ltd. (MHI) Group, based in Yokohama, has delivered the first LNG (Liquefied Natural Gas) fuel supply system "FGSS (Fuel Gas Supply System)" for dual-fuel marine engines. This system will be installed onboard the first LNG fueled pure car carrier (PCC) built in Japan, which is currently under construction at Shin Kurushima Toyohashi Shipbuilding Co., Ltd.
The FGSS is an LNG fuel gas supply system developed by Mitsubishi Shipbuilding utilizing LNG and vaporized gas handling technology developed through its long experience on the construction of LNG carriers, and also has been verified for marine use backed by accumulating experience in marine engine test facilities at engine manufacturers.
The FGSS consists of LNG fuel tanks, LNG fuel gas supply units and control unit etc., and is delivered in modules, which is expected to contribute to the optimum design of the cargo space and help the shipyard to shorten the installation period, as well as support safe operation by customizing the control system, etc. of FGSS to meet the operational needs of the shipowner.
Mitsubishi Shipbuilding has also provided the shipbuilding yard with the engineering service and technical support relating to the gas handling of the ship.
The supply of FGSS is expected to greatly contribute to the environmental performance of the ship and not only to meet the sulfur oxide (SOx) emission regulations coming effect globally in 2020, but also to improve the energy efficiency (CO2 emissions per unit of transportation) of the ship by approximately 40%, which is far exceeding the International Maritime Organization (IMO) EEDI Phase 3 requirements(1) that will become effective in 2025. The ship is additionally expected to reduce SOx by approximately 99% and nitrogen oxides (NOx) by approximately 86% compared with the conventional heavy oil-fired engines. Further, the ship has also been adopted by Japan's Ministry of Environment and Ministry of Land, Infrastructure, Transport, and Tourism as the model project to reduce CO2 emissions by using alternative fuel.
To convert conventional oil-fired ship into LNG fuel ship is one of the solutions to conform to the emission regulations. By providing FGSS and the related engineering services and technical support for new buildings and conversions, Mitsubishi Shipbuilding is going to contribute to the economy for the ship owners and operators, increase the added value of the ships and reduce the environmental load that is increasing on a global scale.
(1) EEDI Phase 3 requirements:
Regulations on the energy efficiency of ships based on the 2013 revision of the International Convention on the Prevention of Ship Pollution 1997 Protocol (Appendix VI to the MARPOL Convention). EEDI (Energy Efficiency Design Index) is the number of grams of carbon dioxide (CO2) required to carry 1 ton of cargo for 1 mile, and the reduction rate from the baseline (baseline) will be gradually enhanced. Car carriers are required to implement reductions of 5% by 2015 (Phase 1), 15% by 2020 (Phase 2), and 30% by 2025 (Phase 3).
Topic: Press release summary
Source: Mitsubishi Heavy Industries, Ltd.
Sectors: Energy, Alternatives
https://www.acnnewswire.com
From the Asia Corporate News Network
Copyright © 2024 ACN Newswire. All rights reserved. A division of Asia Corporate News Network.
|
|
|
